Wuhan Juhere Photonics Technologies Co., Ltd
Optical Fiber Section Analyzer (RIP-100)
Classification:
RlP-100 is used to test the refractive index distribution of any fiber type. it can provide a three-dimensional distributed refractive index distribution along the fiber axis, assisting in NA calculations. In addition, RlP-100 can also measure the geometric parameters of fiber, as wel as the qain section of rare-earth doped fiber.
Contact:
Application
RIP-100 can be used to analyze microinstruction optical fiber, optical fiber beam combiner, high power active optical fiber. To help customer study optical fiber preparation process, fused biconical taper process, and splicing process.
Features
Specification
| Parameter | Typical value |
| Refractive index accuracy | ±0.0001 |
| Spatial resolution | Better 500nm |
| Measurement wavelength | Typical value 632nm (wavelength customization) |
| Optical Fiber diameter | 40μm~800μm |
| Optical Fiber material | Quartz,plastic and other transparent material |
| Optical fiber type |
Single/multi-mode, large mode area,rare-earth doped fiber, Cladding Pumped,microstructure fiber,Polarization-Maintaining fiber, and etc |
| Concentricity error measurement | ±200nm |
| Cladding non-circularity error measurement | ≤0.5% |
| Core non-circularity error measurement | ≤3% |
| Test time | ≤3min(360 Angle accurate measurement) |
| Test method | Full automatic, non-destructive measurement |
Testing photography
Splicing analysis
Yb ion relative concentration
Test pictures
Refractive index section
2D mode section reconstruction
Leave A Message
Keyword:
Optical Fiber Section Analyzer (RIP-100)
Related Products
Contact Us
Add: 6/F, Building #5, Optical Valley New Dynamic, #219 Guanggu 2nd Road, East Lake High-tech Zone, Wuhan 430205, P.R.China